struttinhoyt Posted May 28, 2005 Report Share Posted May 28, 2005 I wouldnt shoot with it like that.....you might check at your local bow shop they usually have spares laying around that dont work and just are used to rob small parts off of such as your self....they might have an old release with an adjusting screw the same size...... Quote Link to comment Share on other sites More sharing options...
Tony Posted May 29, 2005 Report Share Posted May 29, 2005 Re: Problem with my Little Bitty Goose 3003NCS i agree that its probably to light of a trigger to draw your bow with right now... any local hardware store will have the set screws that would go in there or as suggested a local pro shop... Quote Link to comment Share on other sites More sharing options...
Straight Shooter Posted May 29, 2005 Report Share Posted May 29, 2005 Re: Problem with my Little Bitty Goose 3003NCS I've got two of the lil bitty goose's and those screws are a 1/16-32 or a 1/16-38 thread. I'd say your best bet would be to get one from Scott archery or take the release to a hardware store and let one of those guys match it up. You don't want to cross thread it and maybe perminately damage the trigger threads. Good luck. Quote Link to comment Share on other sites More sharing options...
struttinhoyt Posted May 31, 2005 Author Report Share Posted May 31, 2005 Re: Problem with my Little Bitty Goose 3003NCS thats what were here for....... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.