buckee Posted July 24, 2003 Report Share Posted July 24, 2003 I'm pretty sure all you need is a couple of allen wrenches. Have fun Quote Link to comment Share on other sites More sharing options...
robk Posted July 24, 2003 Report Share Posted July 24, 2003 Re: Putting on a rest... just screw the bolt in on the whicsker bisquit until you can see how the rest can moved to line up and hten sighten it down so you can eyeball to set itup level. then take and look from the front to the back of the bow at the riser shelf and line the bisquit up and you can loosen andtighten it up.get your center of the arrow hole in the bisquit lined up center with yor string and then tighten the arm of the rest down and then line itup from the back looking toward the front of the bow. then take an arrow andsee ifyour arrow is level with your bow and riser shelf. then take and set your bow on the ground and look at the arrow over the top. see if the limb bolts and the shaft of the arrow line up close to center of the limb bolt this will get you started in shooting your first shots. the drop tine is a gerea tlittle rest and i have one always on standby incase somethign should happen to my shooter bow. it;s easy to set up and tune. when cranking downt he bolt to set the rest up to the riser make sure you keep pressure on the bisquit so the rest won;lt pop up from the back and keep you level good luck rob k Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.