Question on scope mounts

[archerjg]

This is probably a dumb question but? I have a T/C Black Diamond XTR muzzleloader and would like to put a scope on it. I want to put the Leupold rings on it, but I am not sure which ones will fit. Everything that I see is for the Encore and Omega and are the quick release one piece.I think that these will work, but I want to make sure. Which ones will work? Any Help is appreciated.

Archerjg

[AJ]

Re: Question on scope mounts

Yep, you can get a Leupold set of QR mounts and rings for the Black Diamond. Here is the info:

QR Mounts - T/C Black Diamond (2 pieces)

Matte: part #52833

Rings

QR 1" Matte:

Low: part #49971

Medium: part #49974

High: part #49979

I see Midsouth Shooters Supply has them in stock.

[wtnhunt]

Re: Question on scope mounts

I put cva's removable see through scope mounts on my black diamond. Makes it easier to get into the breech with the scope on with the high mounts. They have worked out just fine. Have had to make very little adjustment after putting the scope back on after each cleaning, never more than 1 or 2 clicks off of being right back where I had it zeroed.

Not so sure the one piece mounts for the encore and omega will work with a black diamond. The breech on the encore is at the end of the gun as where the black diamond is not. One piece mounts I would think would cover in your breech area.

[archerjg]

Re: Question on scope mounts

Thanks guys. I appreciate the info I am going to try to get the scope mounts and rings this week and put them on.

Archerjg