HarvDog Posted February 16, 2006 Report Share Posted February 16, 2006 What's the best way to clean your bore snakes and bore mops? Quote Link to comment Share on other sites More sharing options...
AJ Posted February 16, 2006 Report Share Posted February 16, 2006 Re: Cleaning Cleaning Equipment The bore snakes can be washed with soap and water and hang them to dry. Bore mops get tossed after a few uses. They are cheap enough. I do the same with brushes. Every few cleaning sessions when I notice it taking longer to get the bore clean, I toss the brush and use a new one or keep it to make a tight fitting patch for use with JB. Quote Link to comment Share on other sites More sharing options...
HarvDog Posted February 16, 2006 Author Report Share Posted February 16, 2006 Re: Cleaning Cleaning Equipment [ QUOTE ] The bore snakes can be washed with soap and water and hang them to dry. Bore mops get tossed after a few uses. They are cheap enough. I do the same with brushes. Every few cleaning sessions when I notice it taking longer to get the bore clean, I toss the brush and use a new one or keep it to make a tight fitting patch for use with JB. [/ QUOTE ] You are the man! Thanks AJ. Quote Link to comment Share on other sites More sharing options...
Guest Xen Posted February 16, 2006 Report Share Posted February 16, 2006 Re: Cleaning Cleaning Equipment i kind of like using an over-sized swab in the chamber area, and a brass brush if i have a dirty gun, usually just step up a gauge for that area, 10 for 12, 12 for 20, etc. most of the time, you can get away with just letting the solvent soak for a minute or two and not have to get too aggressive with brushing. Quote Link to comment Share on other sites More sharing options...
WABS Posted February 17, 2006 Report Share Posted February 17, 2006 Re: Cleaning Cleaning Equipment On my snakes and barrel brush I use a little Rem Action Cleaner and then wipe them off. Cleans them up pretty good. Quote Link to comment Share on other sites More sharing options...
LETMGROW Posted February 18, 2006 Report Share Posted February 18, 2006 Re: Cleaning Cleaning Equipment I clean my mops in soap and water then put them in my drill press for a few minutes. This spins the water out and gives them shape again so they don't mat down. Any drill works, I just like the drill press because I can turn it on and walk away. Just hold a towel up for the first few seconds or you are going to get damp. LOL Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.