HELP! bow site moving


Guest john9

Recommended Posts

I have an Impact Archery 3 pin site. I put my bow into the case (SBK single bow) close the top and 4 latches. I remove the bow, shoot and the shots hit way off to the left. I resight the bow. The put bow back in the case, close case. Shoot bow, sight is off to the left again.

The case is not pressing on the site with any force, I am not forcing the case to close on the bow. The adjustment screws on the site are so tight, I can not belive the slight pressure of the case is causing the windage to move, but this seems to be what is happening. Any ideas about what is going on? Is my site junk? Thanks in advance for your help.

Link to comment
Share on other sites

Guest aaronchase

Re: HELP! bow site moving

i had the same situation... what i did is i looked it over really good and what i found was a hairline crack in the ajustment area... im not sure if that is your case but if you have this choice i would just recommend getting another sight or like PA said i would take it to a pro shop and see what they say

Link to comment
Share on other sites

Re: HELP! bow site moving

Thanks for the replys. I will give it a close look this weekend. Even if I do not find a crack, I think I will replace it. Everything on the bow is top of the line, except the site. I was looking at the G5 5 pin models, any comments about those sites?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.