Born4it Posted June 11, 2007 Report Share Posted June 11, 2007 Has anyone done this? You don't really need the G5 Montec Sharpener do you? I was just going to use a regular stone. Thanks for the advice! Take care, Ryan Quote Link to comment Share on other sites More sharing options...
Leo Posted June 11, 2007 Report Share Posted June 11, 2007 They certainly can be resharpened on any good stones. Keep in mind though if you're not that great getting a good edge on knives, resharpening broadheads is hopeless. So be honest with your own abilities. Quote Link to comment Share on other sites More sharing options...
Rhino Posted June 11, 2007 Report Share Posted June 11, 2007 Sure you can use a regular stone. You'll also need a piece of leather to polish the edge after you get it sharpened to where you want it with the stone. Finishing it off by polishing the edge with leather will give it that razor sharp edge you want. Quote Link to comment Share on other sites More sharing options...
Guest bowhunter56 Posted June 11, 2007 Report Share Posted June 11, 2007 I switched to their new head the Striker, no need to sharpen them,,,,scary sharp. Quote Link to comment Share on other sites More sharing options...
BowtechTurkeyHunter Posted June 13, 2007 Report Share Posted June 13, 2007 The key to using there stone is that it is perfectly flat ... and you can do 2 blades at the same time ... if you dont have a perfectly flat stone you shouldnt even try it ... it is NOT like sharpening a knife Steve Quote Link to comment Share on other sites More sharing options...
Born4it Posted June 13, 2007 Author Report Share Posted June 13, 2007 What happened is that I shot a couple deer with the broadheads and they have dried blood and a couple hairs on them. Could I just wash them off and use them if I clean them very well? Thanks for your help! Ryan Quote Link to comment Share on other sites More sharing options...
ParsonsOutdoors Posted June 14, 2007 Report Share Posted June 14, 2007 What happened is that I shot a couple deer with the broadheads and they have dried blood and a couple hairs on them. Could I just wash them off and use them if I clean them very well? Thanks for your help! Ryan I'd give them a good wash, then run them over the flat stone going in one continuous direction. One stroke on each side as you rotate the head. After finishing with the stone, then use a piece of leather. They'll be back to the original shape in no time. JP Quote Link to comment Share on other sites More sharing options...
Guest yoders_hideaway Posted June 16, 2007 Report Share Posted June 16, 2007 I switched to their new head the Striker, no need to sharpen them,,,,scary sharp. will their striker broadhead fly the same as the g5 montec? Quote Link to comment Share on other sites More sharing options...
MikeB Posted June 17, 2007 Report Share Posted June 17, 2007 I use a 2 sided diamond stone. Works great!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.