Guest AllArmyoutdoorsSD Posted January 3, 2005 Report Share Posted January 3, 2005 I started shooting 3D archery when I was 12, I used a barrowed Martin. The guy that got me started was a proshop owner and he set everything up for me. I was only able to shoot for about a year and a half but was hooked. Now that I am back in the states and some what stable as far as deployments etc. I have gotten back into archery, I pretty much set my new bow up and was successful in this past years season for whitetail, but I wanted to run my set up by you all and see if I am set up ok or just lucky, I bought a PSE BabyG (NOT for beginners I know) durring the warm weather I shoot with a 65 lb draw when it got cold I dropped it down to 55 lbs. Now I am shooting Carbon Express CX 300 cut a t 27 inches and I shoot 125 grain Rocket Steel head mechanical broad heads, the reason reason I am shooting 125's is because I tuned my bow with 125 grain field points and didn't want to start over. I don't know all of the math and science of archery yet but I do know that if my target is within 35 yards my arrow will find its mark. Looking for suggestions comment and concerns thanks Justin Quote Link to comment Share on other sites More sharing options...
Guest AllArmyoutdoorsSD Posted January 3, 2005 Report Share Posted January 3, 2005 Re: lack of pro shops Am I going to be in trouble when I start shooting 3D again. As far as my arrow goes? Like I said when I was shooting before Carbon was a dream. Quote Link to comment Share on other sites More sharing options...
Guest AllArmyoutdoorsSD Posted January 3, 2005 Report Share Posted January 3, 2005 Re: lack of pro shops UH Draw length?? I had to put the arrow on my bow draw and mark where I needed to cut, When I set up the bow I had to draw and play with the stop and let off settings some. I just got it to the point where when at full draw I had a little bend in my arm and when I anhored it felt like I remember it should. I may be way off but I still shoot the nocks off at 30. I bought the bow used I am sure it built in the last 3 yrs as the original G force was in 01 or 02 I think. Any help is appreciated. Quote Link to comment Share on other sites More sharing options...
Guest AllArmyoutdoorsSD Posted January 3, 2005 Report Share Posted January 3, 2005 Re: lack of pro shops The arrow at full draw rests one 1/2 in. in side the riser, basically my broad head is just foward of the rest by 1/2 in. I am guessing then I have a 27.5 draw length? Quote Link to comment Share on other sites More sharing options...
Guest AllArmyoutdoorsSD Posted January 3, 2005 Report Share Posted January 3, 2005 Re: lack of pro shops Thanks I guess I am looking for reassurance, got to have confidence in your self and your equiopment. I am sure you will hear from me again. Thanks for the help! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.