Mighty Nifty


RangerClay

Recommended Posts

Congrats on the robinhood!!

Extreme is an awesome sight. Just be very careful where the fibers wrap around to the backside of the pins, they are brittle in the cold and will break if you bump them on the brush. They are easy to replace, (I've broke a few of them :o) and you can get protective covers to put on your sight for going to and from your stand.

Link to comment
Share on other sites

Guest lovetobowhunt
Congrats! I've got a black RT900 on mine....and I like it alot:)

Welcome to the club,lol

Same here on my hunting setup. I wish I had got the one with 4 pins instead of three.

Congrats on the Robin Hood!!!!

Link to comment
Share on other sites

Congrats on the robinhood!!

Extreme is an awesome sight. Just be very careful where the fibers wrap around to the backside of the pins, they are brittle in the cold and will break if you bump them on the brush. They are easy to replace, (I've broke a few of them :o) and you can get protective covers to put on your sight for going to and from your stand.

I bought a protective cover and it is actually really nice. Its a tough material and it encloses snug around the sight.

Link to comment
Share on other sites

Guest LIVEWIRE
That is awesome! I definatley would of recommended that sight. You can't go wrong with Extreme products. Thats the number one selling sight at my pro shop that I volunteer at. We push extreme a lot.

TOM,

I had to make a cover to go on the back side of that site to keep the twigs/limbs from catching on the optic fibers after it goes through the pins.

The day it happened to me, as I got to the pro shop, I was the third hunter, that day that came in with broken fibers.

I made a plexiglas shield to cover the pins from the backside.

NOW IT'S A GREAT SITE.

I replaced the fibers with BRIGHTFIBERS,the ones that you can bend ,streach, and it won't break.

Link to comment
Share on other sites

TOM,

I had to make a cover to go on the back side of that site to keep the twigs/limbs from catching on the optic fibers after it goes through the pins.

The day it happened to me, as I got to the pro shop, I was the third hunter, that day that came in with broken fibers.

I made a plexiglas shield to cover the pins from the backside.

NOW IT'S A GREAT SITE.

I replaced the fibers with BRIGHTFIBERS,the ones that you can bend ,streach, and it won't break.

It was a great sight to start. Once again I'll say I bought the Extreme cover for mine and it is fine and I would recommend getting it to protect the fibers. Yes the fibers are brittle, but that is how it is with any sight that has exposed fibers. Of course a .019 pin is going to be brittle. We don't have that many people come in with the problem. Yes it has come up, but not very often. Good for you for improving something. Maybe you should recommend the use of those fibers to all the other companys that dont' use them. It is still a great sight none the less.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.