22lr accuracy


johnf

Recommended Posts

I've got an old decrepit Marlin Model 60. I took it out this weekend to do a little . It didn't really shoot like I thought it should. I shot about a 1.5" group at 30 yards shooting the whole tube out pretty quickly. There weren't any fliers, but that didn't seem that good to me. Should I try it again and slow down, or should I start saving up for another gun.

On a side note, the first two or three tubes of shell that I shot had about 5 or six jams in them, but after that I didn't have any jams and shot about 150 rounds. Does that make any sense at all?

Link to comment
Share on other sites

Well, in my experience, the cheap 22 ammo out there is fairly inconsistant. If you slow down a little, your groups will get a little tighter, but you'll probably still be a little big unless you buy some good quality ammo (rather then the big giant milk cartons). That being said, with a 22 its no fun shooting when you see $$$ every few seconds....

A newer gun might shoot a little tighter, especialy if you have alot of rounds through that old barrel. You also may be able to get a new barrel if that one is starting to get shot out, but .22's are fairly cheap and you just might be making the better investment in a whole new gun...

Link to comment
Share on other sites

I had my Remington 597 HB .22LR out plinking a little this weekend too. I was around 40 yards, leaning the gun on the seat of my 4-wheeler and shooting 10 shot groups that you could cover with a nickel. I also set up some beer caps laying flat and could hit the sides of them, I tell ya for $300 that is an accurate little gun!! :D

Link to comment
Share on other sites

Don't really want to spend $300 on a 22. If I were going to do that I would probably put in a little more and get a rem. 700 in 270 or 308. I'm thinking about getting a 10/22. I'll probably take the old one out again and slow down to see what I can do with it. I really just want something that I can squirrel hunt with and pop the occasional possum or armadillo in the back yard.

Link to comment
Share on other sites

Get a bottle of #7 Shooters Choice bore cleaner and follow the instructions on the bottle EXACTLY. You have to dry patch the heck out of it after cleaning with this and each dry patch can only be pushed in once and out once.

Seems like you're wasting a pile of patches but usually this effort will make quite a difference.

I use this stuff on my bigger centerfires too. More work but way better results than any other bore cleaner I've tried.

I won't bash other bore cleaners here but trust me I've tried a pile of them.

Link to comment
Share on other sites

I've got a bottle of "Outers" bore cleaner on top of the fridge and the closest gun store is a good hour drive from here. That's the only thing our Walmart carries. Do you think that will do me any good?

The Outers will clean it. This may or may not be enough. You'll shoot it and know.

The difference in using the Shooter's Choice #7 is it also conditions the bore. I've seen this stuff really work miracles on older firearms.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.