Our other neat find from the gunshow...


Recommended Posts

Well, I don't have all my info with me, but I have dabbled in the past. Off the top of my head, you'd load it much like a blackpowder rifle. Measure out your powder. Only, instead of a sabot or patch, you'll put a fiber wad over the powder. Then you measure out your shot, and in it goes. some use a plastic shot cup, some don't. Over the shot, you put down another fiber wad to hold it all in place. I'll get back to you tommorow if I can find my old recipie books...

Link to comment
Share on other sites

Well, I don't have all my info with me, but I have dabbled in the past. Off the top of my head, you'd load it much like a blackpowder rifle. Measure out your powder. Only, instead of a sabot or patch, you'll put a fiber wad over the powder. Then you measure out your shot, and in it goes. some use a plastic shot cup, some don't. Over the shot, you put down another fiber wad to hold it all in place. I'll get back to you tommorow if I can find my old recipie books...

...Thank you!!!:D

Link to comment
Share on other sites

Allright, here's what I dug up. Common powder is FFg. Most loads I've seen are about 80-90 grains, don't know what powder/shot combo your gun will spit out best. Next step, you will use a car and fiber wad, plastic shot cup (much like a modern wad from inside a shotshell), or a felt wad like this guy offers: http://possibleshop.com/wads.htm

That guy recomends two over the powder. Next measure out your shot. I'd recomend using lead and sticking to upland game unless you have a newer barrel that will eat steel. Next, you will put another wad/card on top of the shot, and pack it all in nice and tight with your shotgun ram rod. The over shot card is basicly there to keep your shot from spilling out the muzzle every time you move the gun, and help keep a consistant pattern when you fire.

Thats about it. Stick on a primer, and smoke up the woods, repeat. Fouling isn't as critical in a shotgun, as a rifle, as its a smooth bore weapon. No need to clean quite as often between shots. Have fun with the new gun.

Link to comment
Share on other sites

Guest SuperKirby

Only thing I would add to that is that most people I've come across recommend using the same measure for your powder and shot, so you're using the same amount of powder and shot when measured by volume.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.