muggs Posted August 13, 2008 Report Share Posted August 13, 2008 I have six basement windows I want to replace with glass block. I was quoted a price of $600 by a contractor, but I'm thinking it can't be too hard to do and I'm sure the materials can't be that expensive. So, if I do it myself I'm thinking I can save $300-$350 or so. Plus, a buddy just got a job at Willoughby Supply which is where I'd buy the materials from anyway, so maybe I can even get a bigger savings. Only problem is I've never done it. Anyone have any experience with it? I'm at work so I can't get an exact measure but all the windows are the same size (approx. 24" x 15"). On top of the block for all six windows, I'd want to have one with a dryer exhaust vent, and a normal vent in the other 5 windows. Quote Link to comment Share on other sites More sharing options...
007hunter Posted August 13, 2008 Report Share Posted August 13, 2008 Never done it before, but something to consider, is there another exit other than windows in case of fire in the basement? If there isn't you may want to reconsider making all them all glass block. Good luck! Quote Link to comment Share on other sites More sharing options...
muggs Posted August 13, 2008 Author Report Share Posted August 13, 2008 Never done it before, but something to consider, is there another exit other than windows in case of fire in the basement? If there isn't you may want to reconsider making all them all glass block. Good luck! Yeah, we have a walk-out basement so there's a sliding glass door down there. Good point though. Quote Link to comment Share on other sites More sharing options...
ntrout Posted August 13, 2008 Report Share Posted August 13, 2008 You can buy glass blocks in a frame thats the easiest way, but no its not hard at all. Quote Link to comment Share on other sites More sharing options...
beagleboy Posted August 13, 2008 Report Share Posted August 13, 2008 Don't be scared to attempt it. It very simple as long as you put the spacers in and install the mesh to the sides of the opening. Spacers give you the proper spacing for each block and after the mortar sets up a bit just strike the joint with a brick jointer to give it that professional look. It's not very difficult, try it and save yourself some cash. Quote Link to comment Share on other sites More sharing options...
stevebeilgard Posted August 14, 2008 Report Share Posted August 14, 2008 Never done it before, but something to consider, is there another exit other than windows in case of fire in the basement? If there isn't you may want to reconsider making all them all glass block. Good luck! i know the question was answered, but i need to add more. each bedroom downstairs must have an easily used egress window of 5.7 sq ft opening, or you cannot use it for a bedroom. also, that window may not be over 42" at the bottom off the floor. i know many folks do use illegal bedrooms, but all insurance is cancelled if anyone is killed in a fire and those conditions are not met. so, not only do you lose your kids, but you have no insurance:(. and don't forget ventilation. bottom line is don't do it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.