hunterDWL Posted September 12, 2008 Report Share Posted September 12, 2008 having problem when i shoot my string goes pass the string suppresor i think its called at the top of the bow its a black max 2 had it 2 years are they just old or ????????? any ideas please thank you Quote Link to comment Share on other sites More sharing options...
HUNTINGMAN Posted September 12, 2008 Report Share Posted September 12, 2008 Sounds like the supressors are worn out,check them and see if they are cracked or extra flimsy.May need to have your pro shop look at it.It probably isnt nothing major,if you figure it out let us know so us fellow mathews shooters will know what to look for. Quote Link to comment Share on other sites More sharing options...
Michiganbowhunter_SQ2 Posted September 13, 2008 Report Share Posted September 13, 2008 I'm guessing they are just worn out. I replaced mine after a year with my switchback. The top one wears faster than the bottom also. Should be no big deal, call up your local mathews dealer and see if they have any. They are only around $10-$12 for the set, and easy to install. One more thing, when you get them, whether you install them yourself, or the pro shop does it, make sure the right one is in the right spot. There is an "I" on one (for Idler wheel) and a "C" on the other(for the cam). Quote Link to comment Share on other sites More sharing options...
Chrud Posted September 13, 2008 Report Share Posted September 13, 2008 The top one wears faster than the bottom also. If the top is worn more than the bottom, there is a good chance your string has stretched and your axle-to-axle is a bit long. That is the experience I've had with my Switchback. When I switched to a Winner's Choice string and got my axle-to-axle and brace height back to where they should be, the supressors began to wear evenly. Quote Link to comment Share on other sites More sharing options...
Michiganbowhunter_SQ2 Posted September 13, 2008 Report Share Posted September 13, 2008 If the top is worn more than the bottom, there is a good chance your string has stretched and your axle-to-axle is a bit long. That is the experience I've had with my Switchback. When I switched to a Winner's Choice string and got my axle-to-axle and brace height back to where they should be, the supressors began to wear evenly. yeah, Chruds right. I was trying to go off what I could remember reading over at the Mathews forum:o. If your bow is in spec and your Idler lean is correct they should wear the same. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.