Rhino Lining Facts!


Recommended Posts

Hello all,

I'm a trained Rhino Tech at the autobody Shop i work for i mainly just do collision work now and full time painter. I figured id post some facts about the lining if anyone was interested in getting one.

  • Rhino is a 2 part catalyzed poly-urethane product.
  • In low humidity it dries in 15 seconds.

About the Humidity if you get one done ask the dealer if they control the spray enviroment you would not belive how crappy and short lived a liner can be if sprayed in 50%plus humidity. Rhino attracts moisture as its applied when in its liquid form ( like a sponge sitting on top of water). The more moisture the less durable the liner it becomes real porus and thats when it fails and chips cracks.

  • Lifetime warranty on liner ( the actual company doesnt warranty it the shop pays outta pocket for it)
  • There are different colored pigments to change the color but they never last.
  • The sun will bleach the color in a open bed unless covered , only black last long and will dull out over time.
  • It can be applied to any surface except plastic .
  • It really is tuff stuff and great to use .

For the people out there who have had problems with the Rhino Brand product I can guarantee it was because of the shop who sprays it.

A peeling liner is caused from a unsanded surface and many places go the cheapo rought to cut corners which in the end makes the consumer mad. When we had to repair a liner you need a air chisel to take the liner off. The chipping and cracking is usually due to a high humid time of spray.

Any questions or anything paint/body related feel free to ask me!

Dan

Link to comment
Share on other sites

I had my '98 Dakota sprayed, and the liner had a few dings in it from pitchforks and such, but I am sure they would have fixed it had I asked. I had that truck with liner for almost 10 years before I sold it, and was happy with the liner. I had my new truck sprayed, too. I put a ding in it the second day by sliding a skid with a nail sticking out the bottom across it (didn't know about the nail at the time, of course.) I'll take it in pretty soon and ask them to fix it. It is tough stuff.

HB

Link to comment
Share on other sites

I work in Ellington Kar Kare Collision, been there for about 6 years painting there for 2 now. Were real slow i got to painting my new bed for my Ram and did a Rhino in it this past thursday. What shop you work at and you guys staying busy? Also what paint line you use were a sikkens shop.

Dan

Link to comment
Share on other sites

Codman...I work at R&C Autobody in Shelton. We had a pretty slow winter, and spring, but we are jamming. Nice to be busy for a change! We were a Sikkens shop, and about 3 years ago we switched to Spies Hecker. We are in the process of having an Accu-Draft paint mixing room installed, and in the next month we are switching over to Standox( I believe..PPG is pushing us hard)) water-based. Are you guys spraying water?

Link to comment
Share on other sites

No water yet i have sprayed a few Demos this year i did a Standox water demo it was easy to spray just color looked weird. Most recently I did a Transtar NOMix Demo and sprays like any solvent based just lower VOC's. They have no clue what they want to do i dont care as long as its not crap to paint.

Link to comment
Share on other sites

  • 2 weeks later...

I have had a Rhino liner sprayed in the 2 trucks I have owned (2002 Ford Ranger & 2004 GMC Sierra). I can not say how the liner held up in the Ranger as I barely had the truck for 2 years. However, I can say the liner in my 2004 Sierra is still in good shape after 6 years. It is a little faded and does have a couple scars but nothing major. I had always heard the environment that it was sprayed in had a huge effect on the quality of the liner.

Link to comment
Share on other sites

I have had a Rhino liner sprayed in the 2 trucks I have owned (2002 Ford Ranger & 2004 GMC Sierra). I can not say how the liner held up in the Ranger as I barely had the truck for 2 years. However, I can say the liner in my 2004 Sierra is still in good shape after 6 years. It is a little faded and does have a couple scars but nothing major. I had always heard the environment that it was sprayed in had a huge effect on the quality of the liner.

This is true for all spray in liners.

When purchasing any spray in liner, take a look at the spray booth. If its protected with plastic from the environment its good, if its not and has ways if moisture to get in the booth while spraying is going on, go somewhere else.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.