Swamphunter Posted May 1, 2006 Report Share Posted May 1, 2006 Why is it my peep sight never quite aligns with my eye so I have the full view through it. It causes guessing and this causes bigger groups. I can't seem to get the peep to align perfectly with my eye everytime. What is the corrective measure for this? String loops help some, but is there something better?? Quote Link to comment Share on other sites More sharing options...
mo_hunter Posted May 1, 2006 Report Share Posted May 1, 2006 Re: Peep sight alignment Yes a string loop should fix it. With my LX the factory serving my loop would slip and I had to have the area reserved and the problem was fixed. For the last two year I've used a no peep so I don't ever have to worry about a peep turning again. Good luck Quote Link to comment Share on other sites More sharing options...
mo_hunter Posted May 1, 2006 Report Share Posted May 1, 2006 Re: Peep sight alignment Also if you close your eyes and draw your bow and anchor when you open your eyes you should be able to see thru your peep without having to move your head. If not you need to have the peep moved because that's the way it should be. Quote Link to comment Share on other sites More sharing options...
hutchies Posted May 1, 2006 Report Share Posted May 1, 2006 Re: Peep sight alignment Swampy part of the problem probably is if you don't have over 200 shots on that string it has not set yet. I gave up my string kept stretching so much. I went back to a tube peep and am busting nocks. Quote Link to comment Share on other sites More sharing options...
Chrud Posted May 1, 2006 Report Share Posted May 1, 2006 Re: Peep sight alignment Shoot your bow about 250 times, let it sit overnight and then check and reset (if necessary) the axle-to-axle and brace height measurements. Quote Link to comment Share on other sites More sharing options...
BowtechTurkeyHunter Posted May 1, 2006 Report Share Posted May 1, 2006 Re: Peep sight alignment Its gotta be because of it being a Switchback lol ... jk .... its exacctly what Chrud said you need to stretch the string .... Steve Quote Link to comment Share on other sites More sharing options...
Swamphunter Posted May 1, 2006 Author Report Share Posted May 1, 2006 Re: Peep sight alignment Ya I forgot about the string stretch....been so long since I have had a new bow with a brand new string. I thought about adding one of these after... Quote Link to comment Share on other sites More sharing options...
hoytguy08 Posted May 2, 2006 Report Share Posted May 2, 2006 Re: Peep sight alignment that d-loop otta help but like the guys said earlierthe string stretch is probably causing it Quote Link to comment Share on other sites More sharing options...
Guest PAT_PATTERSON Posted May 2, 2006 Report Share Posted May 2, 2006 Re: Peep sight alignment Swamp Hunter, Larry wise had a good article on tying in a peep by using 10 overhand knots using serving material. alternate knot from front to back as you tie them above and below the peep. After you tie the 9th knot tie in a short piece of serving to tie your 10th knot through it and use it to slip it under the other knots to finish off. The beauty of these overhand knots are they will screw up or down your string thus allowing you to move your peep in the string twist and make it lay flat every time. Very adjustable.... Quote Link to comment Share on other sites More sharing options...
AdvantageTimberLou Posted May 2, 2006 Report Share Posted May 2, 2006 Re: Peep sight alignment Ken, Personally I would use a string loop over that Ultra Nok, with the Ultra Nok the screws could come loose and when a 140" or bigger buck is in range you don't want that happening. My buddy has one and he has to check the screws often. With a string its just peace of mind IMHO! As for your string, give it some time, 200+ shots should work! LOL!! Quote Link to comment Share on other sites More sharing options...
MCH Posted May 2, 2006 Report Share Posted May 2, 2006 Re: Peep sight alignment I'd go with the string loop also. It will help. But if you do experience stretch, all it takes is putting your bow in a press and twisting the string. If you're primarily a bowhunter, this is a must. However, if you're shooting competition, a simple twist of the string before you draw usually fixes it for that shot. In fact, my shot routine up until last weeked was to twist the string to the right after I connect my release. Quote Link to comment Share on other sites More sharing options...
Leo Posted May 2, 2006 Report Share Posted May 2, 2006 Re: Peep sight alignment Honestly I'd stay away from D-Loops. String loops are far gentler on your bow. Peep alignment can drive you nuts even with a string loop. Been there done that. Silicone Tube alignment peeps work everytime but you will get some noise and speed loss from these. Honestly just for hunting Timberlines No-peep or a kisser are better options (Both work together rather nicely ). Low light is a peeps achilles heel and they have a particularly nasty habit of going out of alignment or being too hard to see thru right when your drawing on an animal. If you want to shoot dots, stick with the hassle of a peep. If you want to have one less thing to worry about while hunting, get rid of it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.