tedicast Posted May 13, 2006 Report Share Posted May 13, 2006 If any of you are using, or considering using these heads, there is a test review of these heads posted on the Reapers blade. Wasp JackHammer test on The Reapers Blade There are tests for some other popular broadheads, as well as a lot of other good info. Check it out, Quote Link to comment Share on other sites More sharing options...
VTbowman Posted May 14, 2006 Report Share Posted May 14, 2006 Re: Wasp Jackhammers I used then for a seaosn and were impressed with how rugged the blades were.. I missed a couple shots that season and put the heads into dirt and stones and they came out like new. I touched them up to get my edge back and they were good as new. I had tried to do this with other mech heads in the past and their blades would bend slightly causing them to not shut properly. I did all this when the Jak Hammer blades were the thickest on the market at the time. I think .036... I believe there are plently that sport that blade thickness now... One thing I did not care for is how much the forward blade tips stuck out from the ferrel when closed. That, and mine were purposely rounded and dull as to not puch threw skin and hair. They did preform well though... I went back to Rocket 125 Extremes the season after when I switched to 125g steel ferrel heads... They had .036 blades too... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.