Swamphunter Posted May 25, 2006 Report Share Posted May 25, 2006 Anyone in here have a right helical clamp for a Bitzenberger dial o' fletch? I will post this in the classifieds also. I want to switch from left helicals to right helicals due to my field tips continually loosening themselves. Quote Link to comment Share on other sites More sharing options...
hutchies Posted May 25, 2006 Report Share Posted May 25, 2006 Re: Right helical Check AT. Quote Link to comment Share on other sites More sharing options...
Guest PAT_PATTERSON Posted May 25, 2006 Report Share Posted May 25, 2006 Re: Right helical I saw a couple of them on AT the other day Ken, also try to find you a straight. One other question how about the nock receiver, do you have a right or straight? If you have been using a left you will need to change it also. By buying both you may want to look at buying another Bitz all together with a right clamp and receiver.... Quote Link to comment Share on other sites More sharing options...
Swamphunter Posted May 25, 2006 Author Report Share Posted May 25, 2006 Re: Right helical [ QUOTE ] I saw a couple of them on AT the other day Ken, also try to find you a straight. One other question how about the nock receiver, do you have a right or straight? If you have been using a left you will need to change it also. By buying both you may want to look at buying another Bitz all together with a right clamp and receiver.... [/ QUOTE ] Why do I need another nock receiver?? Aren't they in there straight on the Bitzenberger? Quote Link to comment Share on other sites More sharing options...
Guest UltraTec360 Posted May 25, 2006 Report Share Posted May 25, 2006 Re: Right helical Can't help w/ the clamp, but try putting some bowstring wax on the threads of the points. That usually works. Quote Link to comment Share on other sites More sharing options...
Guest PAT_PATTERSON Posted May 26, 2006 Report Share Posted May 26, 2006 Re: Right helical No Ken they are different. If you ordered a Bitz for left helical it will have a receiver for left, and rotate the opposite direction right different also. Straight ect and the secret TM for **** fletch up.. Quote Link to comment Share on other sites More sharing options...
BowJoe Posted May 26, 2006 Report Share Posted May 26, 2006 Re: Right helical Why not just buy the best and call it a day. Arizona EZ fletch. My tips loosen all day long anyway you slice it. I even shot a straight vane and they did the same thing. It's the impact that makes them loosen anyway you slice it. I am just in the habit of checking them all the time after I shoot. Quote Link to comment Share on other sites More sharing options...
Rayzorp Posted May 26, 2006 Report Share Posted May 26, 2006 Re: Right helical [ QUOTE ] Can't help w/ the clamp, but try putting some bowstring wax on the threads of the points. That usually works. [/ QUOTE ] Samething was happening to me,, I tried some bowstring wax on the field tip threads, problem solved!!!! Quote Link to comment Share on other sites More sharing options...
Swamphunter Posted May 26, 2006 Author Report Share Posted May 26, 2006 Re: Right helical Pat...take a look at the jig and see near the round adjustment knobs? It has an L and an R? Doesn't that make it able to switch to a right hand clamp? There is one at top and one at the bottom. Also has a letter C for straight or at least I thought?? Quote Link to comment Share on other sites More sharing options...
Guest RisingSunOutdoors Posted May 27, 2006 Report Share Posted May 27, 2006 Re: Right helical FYI on the loose feild points... Take finger nail polish and place a dab on the lower end of the treads of the field point/ broadhead. When you screw it into the insert it will prevent them from unscrewing but you will be able to "break" them free. I've also used a small amount of Teflon tape to prevent tips from coming loose. Quote Link to comment Share on other sites More sharing options...
Guest PAT_PATTERSON Posted May 27, 2006 Report Share Posted May 27, 2006 Re: Right helical Bitz, Here is how I use mine, front knob sets my center line of my arrow (according to size dia.) Back knob sets how much offset or helical. Nock receiver either right, left, straight, or TM secret. I use a right nock receiver with either straight clamp for offset or helical clamp to put helical on. You need to find out which receiver you have. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.