SonnyThomas Posted May 12, 2010 Report Share Posted May 12, 2010 I saw the Braxe broadhead. Beyond conventional, I wanted to try one so I called NAP. Because interest was low NAP is on the verge on doing away with the Braxe. Discussion took place and I found NAP had tested this hunter head to no end and it chopped through everything. Though possibly being discontinued I wanted to try them and I was sent some for testing. My bow is set to launch a 380 gr arrow at 270 fps.When first picking up one of these Braxe broadheads I found they were super sharp. I mean it felt like the edge was cutting into my fingers. And then I notice the blades are offset to produce a core drill type hole.First test, point of impact. I didn't change anything, no tuning whatsoever. Bam! Dead on with my field points at all yardages.Second test, chopping through bone. No bones, but I had a bunch of 1/4" plywood pieces laying around. So I tried 3 spaced by 2X4s. The Braxe punched through all three and six inches deep into my target bale! After some 20 or 30 shots at my 3D target and I don't know how many times I got pass throughs and buried in dirt, I gave the plywood a second go. Again, complete passthrough.I ordered more.... I was priced $24.85 plus shipping, $4.95.NAP 1-800-323-1279 Quote Link to comment Share on other sites More sharing options...
earnhardts12000 Posted May 13, 2010 Report Share Posted May 13, 2010 y i love my nap crossfires nap make great broadheads Quote Link to comment Share on other sites More sharing options...
Prairiepredator Posted May 13, 2010 Report Share Posted May 13, 2010 I always wondered how good of a broadhead those Braxes would be...I guess they must be pretty good. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.